ASENS GAS ALARM DEVICE;  is a detector that helps ensure your safety by detecting leaks of flammable gases such as natural gas and LPG. This device is designed for use in areas where gas-powered appliances such as boilers, ovens, catalytic stoves, and water heaters are used.
Detection Capacity: Detects explosive gases such as LPG, natural gas, and butane.
Mounting Height: Should be mounted 5-15 cm above the floor for LPG, and 30 cm below the ceiling for natural gas.
Power Indicator: Green LED (Power) indicates the device is operational.
Alarm Indicator: Red LED (Alarm) and audible signal notify gas leakage.
Sensor Lifespan: Approximately 2 years.
ASENS Gas Alarm Device provides early warning against gas leaks, enhancing your safety. Proper installation and regular maintenance ensure effective protection.

ASENS GAS ALARM DEVICE;

• Operating Voltage: 230V AC 50Hz
• Output Type: Dry Contact NC/C/NO
• Power Consumption (Standby Mode): 2.5 W
• Sensor Type: Semiconductor
• Calibration Time: 20 - 60 seconds
• Audible Alert (Buzzer): 85 dB
• Detection Standard: TSE EN 50194-1
• Sensor and Device Lifespan: Approximately 5 years
  • Methane (Natural Gas): 7% LEL (±0.4% LEL)
• Operating Temperature: -20°C ~ 50°C
• Protection Class: IPX2D (Protected against water splashes)